搜索
0576-89975768
WHAT WE DO?
We began to develop and produce the side channel blowers from ten years ago, after so many years, we have the professional and complete team, from developing, producing to sales. And each production procedure is operated in our own workshop, tooling making, die casting, stamping, high precision machining, assembling and automatic spraying, so we could control the quality, cost and delivery date better.
In 2017, we are rated as the top 100 enterprises in Wenling.(No. 51)
OUR CHARACTERISTICS !
? oil free, Insulation class is F, Protection class is IP55.
? Dual frequency 50HZ and 60HZ are available
? Made of die cast aluminum ADC12.
? Dual usage: compressor and vacuum (suction and blow).
? Virtually maintenance free, with sealed long life bearings.
? Smart design and low noise
? ATEX explosion proof motor is available for all the blowers.
? Anti corrosion blower and special color could be customized.
? The energy efficiency for the motor of 2.2kw, 3kw and 5.5kw could reach IE2 standard.
一、原理 旋渦氣泵增氧技術采用旋渦氣泵（高壓風機）將空氣送入輸氣管道輸氣管道將空氣送入微孔曝氣管或是其他曝氣裝置，由于其孔徑小，可產生大量微細化氣泡從管壁冒出分散到水中，而且上升速度緩慢氣泡在水中移動行程長與水體接觸充分氣液相間氧分子交換充分而且還增加了水流的旋轉和上下流動。水流的上下流動將上層富含氧氣的水帶入底層同時水流的旋轉流動將微孔管周圍富含氧氣的水向外擴散實現養殖池水的均勻增氧。具有溶氧、改善養殖水體生態環境、提高放養密度、增加養殖產量、降低能耗、使用安全和操作方便等優點。
二、結構 旋渦氣泵增氧設施主要有旋渦氣泵、主管、PVC塑料管、支管PVC塑料或橡膠軟管、微孔曝氣管(或曝氣盤，氣泡石)、止回閥、球閥等組成。旋渦氣泵常用功率有7.5KW、5.5KW、4KW 、3.0 KW、2.2KW、1.5KW。旋渦氣泵（高壓風機）連接主管、主管連接支管---橡膠軟管---連接曝氣管（曝氣盤，氣泡石等曝氣裝置均可）。
三、安裝 以微孔管為例，安裝方式主要有兩種一是盤式安裝法。配備功率為0.25kw/667㎡將曝氣管固定在用鋼筋直徑為4~6mm做成的盤框上曝氣管盤的總長度8~15m安裝3~4只每667㎡，并固定離池底10~20㎝。二是條式安裝法。配備功率為0.25 kw每667㎡，曝氣管總長度為10~40m左右，管間距10m左右高低相差不超過10㎝并固定離池底15~20㎝。兩種安裝方式為常見形式，盤式安裝簡單快捷，一般推薦盤式安裝。條式安裝，工程量大，分布均勻。
