過壓保護:>120V
-Over voltage protection:>120V
保護方式:出現(xiàn)異常關閉輸出,異常移除后重啟恢復
-Protection mode: close the output and restart the recovery after the exception is removed
空載保護
-No-load protection
保護方式:無負載時立即切斷輸出,接上負載恢復正常保護
Protection mode: When there is no load, immediately cut off the output, connect the load to restore normal protection
電池過放保護
-Battery overdischarge protection
保護方式:當電池電壓放至9V狀態(tài)時,電池將自動截止放電,通電后將自動充電,直至充滿
Protection mode: When the battery voltage is put to 9V state, the battery will automatically cut off the discharge, after power on, it will automatically charge until it is fully charged
電池過充保護
-Battery overcharge protection
電池充至12.6V時將自動截止充電
When the battery is charged to12.6V, it will automatically stop charging
安全性能
Security features
抗震性:-抗振性:10?500Hz,2G 10min./1周期,60分鐘長,每個軸
-Vibration resistance:10 ~ 500Hz, 2G 10min./1 cycle, 60 min long, each axis
耐壓性:輸入與輸出之間:1.5KVAC 輸入與接地:1.5KVAC 輸出與接地:0.5KVAC
-Pressure resistance:Between input and output: 1.5KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC
絕緣電阻:輸入與輸出之間:輸入與接地之間-輸出與接地之間:100M Ohms / 500VDC
-Insulation resistance:Between input and output: input and ground: output and ground: 100M Ohms/500VDC
紋波噪聲:400mvp-p
-Ripple noise:400mvp-p
沖擊電流:冷啟動10A230VAC
-Impact of current:Cold start 10A230VAC
漏電流:<3.5Ma / 240VAC
-Leakage current:<3.5Ma/240VAC